0
You can follow the below method to open the ports in Windows server 2008 :
1. Open Windows Firewall by clicking the Start button , clicking Control Panel, clicking Security, and then clicking Windows Firewall.
2. Click Allow a program through Windows Firewall. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
3. Click Add port. (for example: LDAP)
4. In the Name box, type a name that will help you remember what the port is used for.
5. In the Port number box, type the port number. (for example: 50389)
6. Click TCP or UDP, depending on the protocol.
7. To change scope for the port, click Change scope, and then click the option that you want to use. ("Scope" refers to the set of computers that can use this port opening.)
Alternatively, you can allow a specific program to communicate through Windows Firewall by selecting Exceptions Tab In Firewall.
By default, the programs are blocked by Windows Firewall to secure your computer. Here's how to allow programs to communicate through the firewall:
1. Open Windows Firewall by clicking the Start button , clicking Control Panel, clicking Security, and then clicking Windows Firewall.
2. In the left pane, click Allow a program through Windows Firewall. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
3. Select the check box next to the program you want to allow, and then click OK.
Typically, after disabling firewall, you can allow all the communication through Windows Firewall. In Windows server 2008 advanced firewall MMC, we can configure different policies for Inbound, outbound and connection security traffic. Please check if you disable Firewall on these three scopes. You can run
the following command to disable firewall:
Netsh advfirewall set allprofiles state off
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How you can raise domain functional and forest functional level in Windows Server 2008?
Raise the Domain Functional Level for 2008 server Applies To: Windows Server 2008, Windows Server 2008 R2 When you install Active Directory Domain Services (AD DS) on a server running Windows Server 2008 R2, a set of basic Active Directory features is enabled by default. In addition to the basic Active Directory features on individual domain controllers, there are new domain-wide and forest-wide Active Directory features available when all domain controllers in a domain or forest are running Windows Server 2008 R2. For the new domain-wide features to be enabled, all domain controllers in the domain must be running Windows Server 2008 R2, and the domain functional level must be raised to Windows Server 2008 R2. Membership required: Domain Admins or Enterprise Admins To raise the domain functional level 1.Open Active Directory Domains and Trusts. To open Active Directory Domains and Trusts, click Start, click Administrative Tools, and then click Active Directory Domains and Trusts. 2.In the console tree, right-click the domain for which you want to raise functional level, and then click Raise Domain Functional Level. 3.In Select an available domain functional level, do one of the following: * To raise the domain functional level to Windows Server 2008, click Windows Server 2008, and then click Raise. * To raise the domain functional level to Windows Server 2008 R2, click Windows Server 2008 R2, and then click Raise. Caution Do not raise the domain functional level to a later version (such as Windows Server 2008 or Windows Server 2008 R2) if you have or will have any domain controllers running earlier versions of Windows Server. Important After you set the domain functional level to a certain value, you cannot roll back or lower the domain functional level, with one exception: when you raise the domain functional level to Windows Server 2008 R2 and if the forest functional level is Windows Server 2008 or lower, you have the option of rolling the domain functional level back to Windows Server 2008. You can lower the domain functional level only from Windows Server 2008 R2 to Windows Server 2008. If the domain functional level is set to Windows Server 2008 R2, it cannot be rolled back, for example, to Windows Server 2003.
Which websites show how to open ports in a firewall?
A website that shows how to open ports in a firewall is the Sever Fault website. Another website that shows how to open ports in a firewall is the Windows website.
Exact command you would use to perform an immediate restart of a Windows Server 2008 machine?
open run and type shutdown -r
A local error has occurred plus directoryservices?
There's Active directory on windows 2000 advance server, I have a web server on Windows 2008 server Enterprise Edition, the following code works fine in Winsows 2003 server but when I installed Win 2008 server, it gives me the following errorA local error has occurred.\r\n"} System.Exception system.DirectoryServices.DirectoryServicesCOMException}I want to Authenticate Via AD from my webserver, I even test the port 389 and it was open. I don't know what's wrong on Windows 2008 server that cannot run my code, I search Internet but I found nothing.any solution would be helpful.Thank you
How do you open port 2222 on Windows XP?
You have to have a program that is actually using this port for it to be "open." As long as the program is not blocked by Windows Firewall, the port will be open.
How do you open a port?
This depends on the OS in use. In Windows, you can open a port by entering its port number through the 'Add port' function of Windows Firewall.
What is NETDOM?
NETDOM is a command-line tool that allows management of Windows domains and trust relationships. It is used for batch management of trusts, joining computers to domains, verifying trusts, and secure channels A: Enables administrators to manage Active Directory domains and trust relationships from the command prompt. Netdom is a command-line tool that is built into Windows Server 2008. It is available if you have the Active Directory Domain Services (AD DS) server role installed. To use netdom, you must run the netdom command from an elevated command prompt. To open an elevated command prompt, click Start, right-click Command Prompt, and then click Run as administrator. You can use netdom to: * Join a computer that runs Windows XP Professional or Windows Vista to a Windows Server 2008 or Windows Server 2003 or Windows 2000 or Windows NT 4.0 domain.** Provide an option to specify the organizational unit (OU) for the computer account.** Generate a random computer password for an initial Join operation.* Manage computer accounts for domain member workstations and member servers. Management operations include:** Add, Remove, Query.** An option to specify the OU for the computer account.** An option to move an existing computer account for a member workstation from one domain to another while maintaining the security descriptor on the computer account.* Establish one-way or two-way trust relationships between domains, including the following kinds of trust relationships:** From a Windows 2000 or Windows Server 2003 or Windows Server 2008 domain to a Windows NT 4.0 domain.** From a Windows 2000 or Windows Server 2003 or Windows Server 2008 domain to a Windows 2000 or Windows Server 2003 or Windows Server 2008 domain in another enterprise.** Between two Windows 2000 or Windows Server 2003 or Windows Server 2008 domains in an enterprise (a shortcut trust).** The Windows Server 2008 or Windows Server 2003 or Windows 2000 Server half of an interoperable Kerberos protocol realm.* Verify or reset the secure channel for the following configurations:** Member workstations and servers.** Backup domain controllers (BDCs) in a Windows NT 4.0 domain.** Specific Windows Server 2008 or Windows Server 2003 or Windows 2000 replicas.* Manage trust relationships between domains, including the following operations:** Enumerate trust relationships (direct and indirect).** View and change some attributes on a trust.Netdom uses the following general syntaxes: NetDom [] [{/d: | /domain:} ] []NetDom help
How do you turn off the firewall in Windows XP?
Open Windows Firewall by clicking the Start button , clicking Control Panel, clicking Security, and then clicking Windows Firewall.Click Turn Windows Firewall on or off. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.Click Off (not recommended), and then click OK
Is the display on the android compatible with the X windows system so that an android can be an X windows server or an X windows server can receive a window from an android?
Android X window system is an open source Java implementation of X windows.
What role enables users working at another computer on the company network or on the internet to establish a connection to a server and open an application or desktop session?
Remote Desktop Services allows you to access remotely your company's server and open an application or run a desktop session. In Windows Server 2008 and earlier this was referred to as Terminal Services.
A comparison between mac os x leopard server and Microsoft Windows server 2003 or 2008?
Depends on your purpose, it boils down to this.Mac OSX Leopard Server- Based on OSX, unix based, runs common open-source software and proprietary software from AppleWindows Server 2003- Based on windows (DUH), runs IIS 6, Active Directory, and various other enterprise softwareWindows Server 2008- Contains new version of software in 2003, new AD, and IIS7Hope that helps, go with OSX if you can afford it :)
If alex's user account belongs to the teachers group on a Windows Server 2008 network and the teachers group has read and excuse permissions for the lessons folder what can alex do with documents?
Open an existing document.
