A sacn tool is required.
That requires a scan tool.
With a code reader that plugs in under the drivers side dash.
Bring it to a shop or an auto parts store where they can hook up an OBD II scanner and read the trouble codes. Turn the light off by either fixing the problems the codes tell you, or have the person reading the codes turn off the indicator light using the scanner.
Trouble code P0605 means:Internal control module read only memory (ROM) error
Put the key in the ignition, and turn it from "off" to "run" (WITHOUT STARTING) Three times. The odometer screen should then start to read out the stored fault codes.
Only if trouble codes pop up to determine what they are, but not if all goes well. If it will not shift past 2nd, there is a problem that has caused the trans computer to set a code. Have the codes read and then you will know a possible cause
With a scan tool.
With a scan tool.
You need a scan tool to read codes. ....
You need a engine scanner and then go into transmission trouble codes. Write them down,get a book, look them up, and read. Most scanners will tell you whats going on.
You need a scanning device to read the codes. Many auto parts stores can do this for you at no charge in hopes that you purchase the parts from them needed to fix the problem. There are scanning devices out there you can purchase for under $100 if you want to make the investment.
The ABS light is on because there is a problem with the ABS system. When the problem is fixed the light will reset itself. You need to have the system scanned for trouble codes. The trouble codes will lead you to the problem. Many auto parts stores will read the codes for you for zip if you buy the parts needed to make repairs from them.