0
What else can I help you with?
How do you read error codes on a 2005 dodge caravan?
That requires a scan tool.
How do you read 2001 Dodge Caravan error codes?
With a code reader that plugs in under the drivers side dash.
How do turn off engine light on 2002 dodge caravan?
Bring it to a shop or an auto parts store where they can hook up an OBD II scanner and read the trouble codes. Turn the light off by either fixing the problems the codes tell you, or have the person reading the codes turn off the indicator light using the scanner.
P0605 and service engine soon for dodge caravan 1999?
Trouble code P0605 means:Internal control module read only memory (ROM) error
How do you get error codes for 2005 Dodge Caravan?
Put the key in the ignition, and turn it from "off" to "run" (WITHOUT STARTING) Three times. The odometer screen should then start to read out the stored fault codes.
Do need to use a DRB scan tool after changing transmission on 2002 dodge caravan it wont shift to higher gears and no codes pop up?
Only if trouble codes pop up to determine what they are, but not if all goes well. If it will not shift past 2nd, there is a problem that has caused the trans computer to set a code. Have the codes read and then you will know a possible cause
How do you read codes on a 1998 dodge neon?
With a scan tool.
How do you read codes on a 1998 Dodge Dakota?
With a scan tool.
How do you get trouble codes from a 99 jeep Cherokee sport?
You need a scan tool to read codes. ....
How do you read fault codes on a 91 dodge stealth?
To read fault codes on a 1991 Dodge Stealth, you need to use the On-Board Diagnostics (OBD) system. First, locate the diagnostic connector under the dashboard. Use a jumper wire to connect terminals "A" and "B" of the connector. Then, turn the ignition key to the "ON" position without starting the engine, and the check engine light will flash the trouble codes. Count the flashes to identify the specific codes.
How do you read transmission trouble codes?
You need a engine scanner and then go into transmission trouble codes. Write them down,get a book, look them up, and read. Most scanners will tell you whats going on.
How do you display error codes on a 2005 dodge caravan?
You need a scanning device to read the codes. Many auto parts stores can do this for you at no charge in hopes that you purchase the parts from them needed to fix the problem. There are scanning devices out there you can purchase for under $100 if you want to make the investment.
