How can you remove bios pass ward?

Answer 1

You can do that by resetting the BIOS. To do this:


#1)Turn off the computer
#2)Unplug the tower from the wall outlet.
#3)Open up the side cover and lay the tower down with the motherboard laying flat.
#4)(Depending on your motherboard this might be different) Next to the CMOS Battery( about the size of a nickel) there should be 3 pins with two of them covered by a little tab called a jumper.
#5)With a small, NON-MAGNETIC, Flathead screwdriver, remove the jumper from its two pins.
#6)Set the jumper so that it is one pin over from its original position.
#7)Wait about 30 seconds.
#8)After that return the jumper to its original position.
#9)Put the cover back on plug the computer into the wall and turn on your system.


The BIOS should be reset.

IF this does not work repeat up to step #3.

Remove the battery from its placeholder and waiting 30 seconds again. Return it to its place repeat step 9 and try again.