First, if the spark plug lead has been in use for 30,000 miles or more, replace the lead instead of repairing it. To repair a spark plug lead, carefully strip 1" of insulation from the wire, leaving the core exposed. Fold the exposed core back over the insulation. Place a new connector over the end of the lead. Ensure the core is solidly sandwiched between the connector and insulation. Crimp using proper crimping tool. Lubricate the insulation and slide the boot onto the repaired end.
it means misfire on cylinder 2, to repair- it mean check spark plugs,spark plug lead, loose wire, check coil pack & the y pipe which goes to the catalytic converter,
No. Helicoil
That is usually electrical. Depending in the vehicle, a spark plug wire, a spark plug, or a coil, if individual coil.
It's probably The spark plug well gaskets. You need to remove valve cover and replace the gaskets for the spark plug wells and valve cover. it's a easy repair. It's probably The spark plug well gaskets. You need to remove valve cover and replace the gaskets for the spark plug wells and valve cover. it's a easy repair.
That is the L-shaped female plug at the end of the HT (high tension) lead that fits onto the outer (male) end of a spark plug.
Look for it in the cylinder head, at the top of the engine. You can find it easily by following the spark plug lead or wire.
Follow the spark plug wires, they will lead you right to them.
14-16Kohm / metre
Remove the rubber cover and plug lead from spark plug. Using a bike plug spanner [cheap at your favourite auto supermart] remove plug.
put a spark plug on the end of a spark plug lead and earth the side of it to a bit of metal in the engine..get some one to wind it up and if it doesn't spark, the coils not working. use insulated pliers when you hold the lead!!
.030" is what the repair manual says.
Typically, they would be replaced rather than being repaired. I agree. You may be able to patch together a wire-cored lead sufficiently to get you home, but not a carbon-cored lead, and the proper answer is replace with new.