To replace the ignition lock cylinder on a 2000 Cadillac DTS, first disconnect the negative battery cable to ensure safety. Then, remove the steering column covers by unscrewing the screws securing them in place. Insert the key into the ignition and turn it to the "Run" position, then locate the release pin on the ignition switch and press it while pulling the cylinder out. Finally, install the new cylinder by reversing the process and reassembling the steering column covers.
how do you get ignition switch out of steering column in 2000 catera?
$49.99
You can remove the 2000 Chevrolet Astro Van the ignition switch cylinder by removing the retaining ring. The retaining ring will need to be turned to the left. The ignition switch cylinder will slide out.
A retaining clip holds the ignition switch in place on the back of the ignition cylinder on your 2000 Dodge Ram.
you got the wrong key.
To remove the ignition cylinder on a 2000 Lexus RX300, first remove the vanity engine cover by unscrewing it. Disconnect the wiring connector by pushing the clip that holds it in place. Finally, remove the bolts that hold the ignition cylinder.
Remove the retaining ring from the top of your 2000 Mercedes-Benz ignition lock cylinder. Slide the ignition lock cylinder out and remove the wiring harness.
No
unplug the battery for 2min
Need removal and installation instructions for an ignition lock cylinder -- 1999 Grand Cherokee Limited?
how DO YOU REMOVE AN IGNITION CYLINDER FROM A MALIBU CHEVROLET 2000
4 cylinder, it is on the top of the valve cover. 6 cylinder, it is inside the distributor and is not serviceable.