If you can reset it, then it is not a fuse it is a breaker. You use then so you do not have to replace a fuse, you can just reset the breaker.
There may be a breaker or more likely a pair of fuses. Yes, they may need to be reset or replaced (if fuses).
shut off the power to the box, switch out the breaker and resture the power
To reset a breaker move the handle completely to the off position. If it had tripped you will feel a little resistance as it goes to the off position. If this doesn't restore the power the breaker is either bad and in need of replacement, or there is a persistent fault in the circuit causing the breaker to immediately re-trip. Breakers are safety devices.
A circuit break will reset until it mechanically breaks down. What you should be looking at is why is the breaker tripping all the time. A breaker is a safety device that stop current from overloading the wire that it is protecting. When the breaker trips check and find out what other devices have stopped working. Total up the wattages. If the total is above 1500 watts then something is going to have to be disconnected on that circuit.
You reset a circuit breaker by pushing the reset button.
A manual circuit breaker must be reset by hand, as opposed to an automatic circuit breaker, that may be able to reset itself once it cools down.
If you can reset it, then it is not a fuse it is a breaker. You use then so you do not have to replace a fuse, you can just reset the breaker.
A self resetting breaker will reset itself once the short is removed, repaired, If it will not reset the breaker has failed or the short is still present.
Hilti's population is 20,000.
You should replace the surge strip if the circuit breaker fails to reset.
there is no breaker, u have to replace the fuse
If you have contineous tripping on a breaker then there is a fault on the load of that breaker. Don't reset it any more. What is the breaker connected to?
A fuse must be replaced if blown, a circuit breaker can be reset.
The breaker is self resetting.
Most automotive circuit breakers reset themselves after they cool off. Some bigger trucks use circuit breakers that are reset manually. They have a button you push in to reset the breaker after it has cooled off.
Most automotive circuit breakers reset themselves after they cool off. Some bigger trucks use circuit breakers that are reset manually. They have a button you push in to reset the breaker after it has cooled off.