No oil pressure - after checking with a manual gauge
labor cost for an new oil pump an a Isuzu rodeo 2001
Check the oil pressure sending unit first. The oil filter could be bad or clogged. The oil pump filter screen might be clogged, or the fuel pump could be bad.
try changing your oil sending unit first there is no fuse for your oil gauge drive safe
You can pressure test with a gauge using sensor location
No, if you have oil in your oil pan, you have other problems. It has nothing to do with your water pump going out or being bad.
Oil pressure test. If you have a gage it should read around 40 psi when hot.
It is likely that the piston rings are bad, and the oil is getting into the combustion chamber. that is if it is burning oil.
To change the oil pump in a 1998 Isuzu Rodeo 2WD 3.2L V6, first drain the engine oil and remove the oil pan by unbolting it from the engine block. Next, disconnect the oil pump from the engine by unbolting it and carefully removing it. Install the new oil pump, ensuring the pickup tube is properly aligned and secure, then reinstall the oil pan and refill the engine with oil. Finally, check for leaks and ensure proper oil pressure after starting the engine.
The oil pump rattling is very unlikely, a bad pump causing other components to rattle and damage themselves is VERYlikely.
You have a bad oil pump.
Loss of oil pressure.
Your car or truck will begin losing pressure(meaning you will not be able to drive forward in a normal speed)