Surf to Crucial .com and they will scan your computer for free.
it is loaded on the ram of a computer ( memory ) and it is also loaded on a partiton of your hard drive if your operating systemwas installed when you broiught it it is partitiion 1
Yes, although the amount of RAM installed by default (512 MB) is a little low, and the machine does not have a particularly powerful processor.
the computer's RAM is playing up and restarts when there is massive load or your Operating system files might be corrupt, or if you have just installed a new hardware or software which might be causing this.
Unscientific testing (using VirtualBox and the installed native Momentics suite disc.) indicates that a minimum of 16 MB is necessary to load the base command line and 24 MB to load Photon. QNX4 was famous for running in 8 MB of RAM from a floppy disk, and its possible that QNX6 could also be configured for less RAM usage than my above testing indicates.
32 bit OS support max 2^32 bit = 4GB RAM
No, the slots for DDR2 RAM is different from the DDR RAM. You cannot use DDR RAM with DDR2 slot.
no...you can't
DDR is not as fast ad the DDR2 ans that is the main difference.
ddr, or ddr2
No DDR2 and DDR are not compatible and so you can not add DDR2 RAM module in a DDR Slot. Electrical specifications like voltage, signal pinout and even mechanical size and shape of modules are different.
No DDR and DDR2 Slots are differant on Motherboard so cant replace each another
DDR by a long shot
DDR has a 184-pin DIMM interface and DDR2 has 240. DDR2 runs cooler and has generally slower timings but is a lot faster than DDR in the end. DDR2 is capable of holding more ram on one DIMM.
No! They will not even fit into the socket unless its the correct one.
DDR2 RAM is SDRAM. It provides double the bandwidth of DDR RAM, but at a higher latency. DDR3 is much better than DDR2 performance-wise, and it uses less voltage.
Ddr ddr2 sdram ddr3
DDR and DDR2