no you cant
intake valves are the larger valves or if you count from from either end its number 2,3,6,&7 valve
for intake valve 0.25mm and exhuast valve 0.35mm.
The intake valve is bigger.
With the engine at TOP DEAD CENTER (TDC) Adjust the exhuast valve to .007 and the intake to .005.
They screw in from the top between the valve cover and the intake manifold.They screw in from the top between the valve cover and the intake manifold.
It's either in the intake or in a hose between the intake and valve cover.
There is no difference between check valve and NRV, both are same
The intake valve is bigger to allow the air and fuel into the cylinder. The exhaust valve is thicker to accommodate the heat from the combustion process.
They are under the coils and are located between the valve covers and the intake.They are under the coils and are located between the valve covers and the intake.
No the lifters themselves are all the same. I recommend lightweight pushrods though if you can get them and stay with hydraulic.
I believe that servo is motorized and solenoid is magnetically activated.
intake valve is bigger.