how to choose rate of voltage according to power
electrical power from the power plant to consumer goes through the transmission & distribution system, first we transmit the high voltage power from the power plant to sub station in sub station we step down the voltage according to need & distribute it to the demand.
Power = (current) times (voltage)Current = (Power) divided by (voltage)Voltage = (Power) divided by (current)
Power = voltage * current. Without current, relating voltage to power is meaningless. One thing I can say is the voltage should be dictated by the amount of losses that is acceptable - the cabling you use to transfer the power to your home will have a specific resistance per unit length, which is unchanging. If you choose to use a low voltage, you will in turn use a fairly high current to transfer the energy you want. The power lost in the cable will be P = R * I^2. This loss can become significant, dictating a higher voltage.
Power cords have different voltage rate, example 7A/125V cord can hold much voltage than 3A/125V. The higher the current flow can melt the lower type of power cord that is dangerous and can cause fire. Base on my knowledge there are different types of power cords according to the ampere and voltage needed.
Power is voltage times current.
A transformer
The unit of power is watts, the unit of current is amps, and the unit of voltage it volts. Power = Voltage X Current Voltage = Power / Current Current = Power / Voltage In electricity, power is symbolized with a P, current with an I, and voltage with a V. The real formula looks like: P = V x I V = P / I I = P / V
Transformers are necessary to stepup or stepdown voltage levels so that transmission of power is convenient. without stepup/stepdown voltage level according to our requirement losses will be very high and transmission and usage of power is not feasible.
KVA is a measurement of power; kV is a measurement of voltage. You're asking "What is the power for voltage?", which makes no sense. Power = Voltage times current.
You do not need ohm's law to relate power to current and voltage. Power is current times voltage. If you know current and voltage, you do not need to know resistance.
What voltage should you you have your power box on when tattooing
in ac circuits power,P=VICOS@ @ is the angle between voltage and current. in dc P=VI V is the voltage I is the current. Power (in Watts) is current (A) x voltage (V)