answersLogoWhite

0


Best Answer

you put 2 holes in a cardboard box. Next, you put the nails into the holes, and finally, place the paperclip in between the 2 nails, connecting.

User Avatar

Wiki User

10y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How could you make a circuit switch out of a paper clip and 2 nails?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What are some uses for small paper bags?

There are many uses for small paper bags. One could use small paper bags for carrying small items such as candy, nails, crayons or miniature water bottles.


Would a4 paper complete a circuit?

No paper is an insulator.


Where can you get the Sally Hansen paper nails in Canada?

in a shpo in canada


Can you use paper collated nails in bostich wire weld nailer?

Yes you can, however they have to be 28 degree paper tape collated. They are not very prevalent, but you can find them. You can not use 30-34 degree paper tape collated nails.


What size nails are used for roofing felt paper?

You can use roofing nails, but most people use a stapler, it's cheaper and faster. The felt paper is just a base for the shingles/tiles.


Fan not working on Peugeot 106?

Probably down to a faulty switch, try bypassing the switch by using something metal (paper clip etc) to touch the conectors and complete the circuit while the car is hot enough that the fan should be on. If this solves it you need a new switch. If not look at thermostat?


What force keeps the nails and paper clips attached together?

Magnetism


What are examples of permanent magnets?

refrigerator magnet, (paper clips+nails)


How do you make the nails from The Hunger Games?

Cotton , paper clips tape.


Is to paper as nail is to wood?

No, paper is a material used to write on, while nails are used to fasten things together. A better comparison would be nail to hammer, as nails are driven into wood using a hammer.


How is an open circuit different from a short circuit?

I guess you could call them 'reciprocals' in a sense.-- "Open circuit". . . Has a very high resistance. Nominally infinite.. . . No voltage, no matter how high, is high enough to produce any current through the circuit.. . . Current through it is always zero.. . . Household example: a light switch that's open (labeled OFF in that position).-- "Short Circuit". . . Has a very low resistance. Nominally zero.. . . Any voltage, no matter how small, is enough to produce very high current through the circuit.. . . Household example: toddler stuck a paper-clip into the two holes of the outlet.


What effect would occur if the intermediate switch s3 were replace by a double pole switch?

You seem to be referring about a 3 way lighting circuit. If the cross over switch is replaced with a double pole switch, depending on how the switch was wired into the circuit, the load lamp would either stay on or not light at all. A circuit in a three way configuration has two traveler legs between the two switches The intermediate switch in the circuit just switches the two traveler legs from open to close depending on the position of the other two switched. Google, three way switching, they have many diagrams to work from.