answersLogoWhite

0


Best Answer

These huge structures were built without the help of equipment such as cranes and bulldozers. The ancient Egyptians used tools of copper, a softer metal than iron. Wooden wedges to help prise the stone from the quarry face and levers to help put the stones in place were also used in building the pyramids. Building a pyramid was dirty, difficult and dangerous work. It required meticulous planning and organization. Two varieties of stone were used, limestone and granite. The limestone which made up the bulk of the pyramid was quarried locally. The granite had to be brought from the quarries at Aswan to where the pyramid was being built. They were transported on the Nile River in massive reed boats. The average weight of one of the pyramid's stone block is two and half tonnes. Some of the Aswan blocks, however, weighed up to 70 tonnes. To complete the Great Pyramid at Giza, one stone block was quarried, shaped and placed in position every two minutes for 20 years. It was this hard monotonous work that was done by slaves. Building plans showing how the pyramid was built have never been found, experts use present knowledge about construction to make some intelligent guesses. One can see though how the ancient Egyptians were ingenious people as you look at the work it took to build a pyramid. The limestone blocks were cut out in the quarries close the pyramid site. Most of these blocks were roughly cut to size. Only where precision was needed were they dressed and trimmed often to an exacting standard by the masons. Once the limestone blocks quarried they were hauled on sledges along a causeway by gangs of slaves. Water was poured around the sledges to help them slide. A spiralling ramp of mud, brick and rubble was used to haul the blocks to the level where building was going on. Once at the working level the blocks were man-handled into position by levers and brute force by further gangs of slaves called setters. Once relieved of their load the hauliers would then make their weary way back down the ramp to start the whole process again. A canal connected the pyramid site with the Nile. Here granite brought down from Aswan and fine limestone from Tura was unloaded. These were special stones that involved a lot of preparation in their quarrying, dressing and transportation. A vast amount of labour, of quarrymen, masons and of course slaves.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

14y ago

They cut big limestone blocks and men dragged them to the pyramid site. One the first layer of rock was in place, they built long ramps of earth, to drag up the next layer. They continued in this process until the pyramid was finished. Then they covered it in an outer coating of white casing stones- which they laid so close together that it looked like it was all one stone.

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

Egyptian pyramids are amongst the oldest stone buildings in the world. They were built nearly five thousand years ago. These ancient tombs are also among the world's largest structures. The biggest is taller than a 40-story building and covers the area occupied by Lincoln's Inn (about 13 acres; 5.3 hectares). Men built these huge structures without the help of equipment such as cranes and bulldozers. The ancient Egyptians used tools of copper, a softer metal than steel. Wooden wedges to help prise the stone from the quarry face and levers to help put the stones in place were also used in building the pyramids. Building a pyramid was dirty, difficult and dangerous work. It required meticulous planning and organization.

Two varieties of stone were used, limestone and granite. The limestone which made up the bulk of the pyramid was quarried locally. The granite had to be brought from the quarries at Aswan to where the pyramid was being built. They were transported on the Nile River in massive reed boats. The average weight of one of the pyramid's stone block is two and half tons. Some of the Aswan blocks, however, weighed up to 70 tons. To complete the Great Pyramid at Giza, one stone block was quarried, shaped and placed in position every two minutes for 20 years. It was this dangerous, hard and monotonous work that was done by slaves. This was an era of slave labour and none were more expert in directing their slaves than the ancient Egyptians. The slaves were naked too low in status to be given clothes.

In the minds of the Ancient Egyptians the pyramid form served a very serious purpose. Ancient Egyptians had a strong belief in life after death. The pharaohs wanted their bodies to last forever, so they had pyramids built to protect their bodies after death. Each pyramid housed a pharaoh's preserved body. It also held the goods he would need in his next life to continue living as he had when he was alive. Granite doors, false passages and fake burial chambers were built in an attempt to confuse and stop robbers from robbing the pyramids. In spite of these precautions, all pyramids were robbed of their treasures by around 1000 B.C.

Building plans showing how the pyramid was built have never been found, experts use present knowledge about construction to make some intelligent guesses. The Ancient Egyptians were an ingenious people. You cannot help to be impressed by the fearlessness the ancient builders exhibited in taking on such a colossal project.

The limestone blocks were cut out in the quarries close the pyramid site. Most of these blocks were roughly cut to size. Only where precision was needed were they dressed and trimmed by skilled masons to exacting standards. Once the limestone blocks quarried they were hauled on sledges along a causeway by gangs of slaves. Water was poured around the sledges to help them slide.

A spiralling ramp of mud, brick and rubble was used to haul the blocks to the level where building was going on. Once at the working level the blocks were man-handled off the sledges into position by levers and brute force by further gangs of slaves called setters. Once relieved of their load the hauliers would then make their weary way back down the ramp to start the whole process again.

A canal connected the pyramid site with the Nile. Here granite brought down from Aswan and fine limestone from Tura was unloaded. These were special stones that involved a lot of preparation in their quarrying, dressing and transportation. A vast amount of labour: of quarrymen, masons and of course slaves.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How did they make the pyramids of Egypt?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where did they make pyramids?

In Cario, Egypt lol


Where did the egyptians make the pyramids?

in egypt


What kind of houses does Egypt make?

pyramids


In which country is the pyramids?

The pyramids mentioned are located in Egypt.


How long did it take to make the pyramids in egypt?

20 years


What is the address of the pyramids in Egypt?

the pyramids are located in Giza, Egypt


Was it lower Egypt or upper Egypt with three large Pyramids?

The pyramids are in the lower Egypt.


Do modern Egypt still have pyramids?

yes modern Egypt does have pyramids


Who invented the pyramids of Egypt?

Caucasians of Egypt invented and architected the pyramids.


What are pyramids in Egypt made of?

The pyramids of Egypt are made of limestone.


Where about are the pyramids?

The PYRAMIDS are in EGYPT in CAIRO..............


How much pyramids are in Egypt?

There are a total of 138 pyramids in Egypt, and has been proven.