you need to pop out the frame and unscrew the radio. You will need a wiring harness for an after market stereo.
http://www.modifiedlife.com/2003-hyundai-sonata-car-radio-stereo-audio-wiring-diagram/
The color codes for a 2007 Hyundai Sonata Stereo wiring harness are usually yellow pr green, red or brown, and black or blue. These different color codes are basically used for connection purposes.?æ
you need a dash kit. go to your local stereo shop and they should stock the hyundia kit. any single din size stereo will fit.
Remove the retaining cover from your factory stereo. Remove the factory stereo retaining bolts. Slide the factory stereo out. Remove the wiring harness and the antenna cable from the back of the factory stereo.
Call Crutchfield. They have the installation kit, diagrams and instructions.
If you have the factory installed Monsoon stero, you cannot. Must must but a new stereo that has an audio jack.
To change the factory stereo in a 2000 Vectra, first, disconnect the car battery to ensure safety. Remove the trim panel around the stereo using a trim removal tool, then unscrew the stereo from its mounting bracket. Disconnect the wiring harness and antenna from the back of the factory stereo. Finally, connect the new stereo using the appropriate wiring harness adapter, secure it in place, and reattach the trim panel before reconnecting the battery.
Remove the 2002 Dodge Durango factory stereo decorative cover. Remove the factory stereo retaining screws. Pull the factory stereo out. Remove the wiring harness and the antenna cable from the back of the stereo.
The wiring diagram has four wires. Brown wire for parking lights, green and yellow wire for for stop light and white wire for common ground.
http://www.modifiedlife.com/request-a-hyundai-car-radio-stereo-wiring-diagram/
You need to switch off the stereo and then you can use the buttons next to the clock to change the time. this also changes the time on the stereo.
http://www.modifiedlife.com/2005-hyundai-accent-car-stereo-radio-wiring-diagram/