You need to switch off the stereo and then you can use the buttons next to the clock to change the time. this also changes the time on the stereo.
Reset time on the clock is 1 PM. Just disconnect and reconnect the batttery at 1 PM.
To fix the clock in a 2000 Hyundai Accent, first, locate the clock adjustment buttons on the dashboard. Press the "H" button to set the hour and the "M" button to set the minutes until the correct time is displayed. If the clock is not functioning at all, check the fuse related to the instrument cluster and replace it if necessary. If issues persist, it may require professional inspection or replacement.
Get a manual on your car and do the job right the first time.
I have a 2008 Hyundai Accent GLS and just had the timing belt and spark plug replacement and 60,000 mile transmission svc done at the same time. It took just over 3 hours at the Hyundai dealer.
It could be have a restriction in the gas vapor purge system.
i have tried napa, advanced auto parts, auto zone, battery warehouse, noone had a battery for my 2007 Hyundai accent but CARQUEST did have it and said it is a newer and rare battery at this time ....1/4/2010
The radio/CD player must NOT be turned on. Press the DISP button on the right-hand side until the the clock display starts flashing. Then press the Up or Down arrows to the left of the clock display to move the time forward or backward. These are the buttons you would use to change tracks or stations when the CD/radio is on. When done, press the DISP button again to stop the time from flashing.
if u mean for the timming belt i would sugjest taking it to an expirienced mecanic if you do it wrong it will total your car
To set the clock on a 2004 Suzuki XL7, turn the ignition to the "On" position without starting the engine. Press and hold the "Clock" button until the display starts to blink. Use the "Hour" and "Minute" buttons to adjust the time, then press the "Clock" button again to confirm the settings. The clock should now display the correct time.
To change the time on the clock of a 2004 Mazda van, first, turn on the ignition without starting the engine. Press and hold the "Clock" button until the hours start flashing. Use the "H" (hour) and "M" (minute) buttons to adjust the time, then press the "Clock" button again to confirm your settings. The display will stop flashing, indicating that the time has been set.
how to set time on Renault megaine 59 plate no buttons
To set the time on a Hyundai i10, turn on the ignition and press the "Menu" button on the dashboard or infotainment system. Navigate to the "Settings" or "Clock" option, then adjust the hours and minutes using the corresponding buttons or knobs. Once the correct time is set, confirm your selection to save the changes. If your model has a digital clock, you may need to hold down the "Hour" or "Minute" button to adjust it.