0
What else can I help you with?
How do you change front brake rotors on a 1998 Hyundai Accent?
Change front brake rotors on a 1998 Hyundai Accent?
How do you change the back rotors on a 2002 Hyundai Sonata?
Same way as the front. First remove the calipers, then remove the two cross-point screws that hold the caliper in place . finally, remove the rotors and replace.
How do you get the rotors off of a 1998 Camry?
On most camries you need to remove the wheels, then brake pads, and the calipers. Most camries do not use any screws to hold the rotors, thus when you remove the calipers you should be able to remove rotors without problems.
How do you remove front rotors on a 1994 crown Victoria?
With the wheel off, remove the calipers, then the rotors just come off.
How do you change brake pads and rotors on Chrysler 300C?
Remove wheels then push back the pistons then remove calipers and brackets then the rotors.
How do you remove the rear rotors on an 1986 iroc?
Remove rear calipers and pull. That simple.
How do you change the rotors on a 2001 Ford Focus step by step?
First remove the wheels,then the calipers and hang the calipers with a coat hanger {dont let thenm hang by the hose. Then remove the rotors. That easy,.
How do you change the front rotors and brakes on a 2000 olds intrigue?
Remove the wheel, the calipers and the rotors, reverse procedure with new rotors.
How do you change 240SX rotors?
take wheels off, remove brake calipers. rotors slide right off.
How do you replace front rotors on a 2008 Honda accord?
pull off the front wheels. remove the calipers. remove the two screws that hold on the rotors. replace the rotors and reverse the procedure.
How To Change Rotors On Chevy Cavalier?
jack it up remove the wheel then the brake calipers then the rotors should slide off
How to remove rotors on 2002 Hyundai Accent?
After you remove the wheels and the calipers and caliper mounts you will need to use an impact screwdriver. They cost about $6 or so. It looks like a nut driver and it uses screwdriver type bits. You put it on the screw and hit it hard with a hammer to loosen the screws. After they are out it is just the reverse to put everything back together. Hope this helps!
