If refering to the 5 button keypad on the door I recomend finding an owners manual for your 2000. My 2001 manual explains how )other than going to the dealer) however the do it yourself method starts with knowing you factory set 5 digit code. The code, if not know, is supposed to be taped to your CPU (mine was not). If you have you factory set 5 digits code then (for my 2001) enter the 5 digit factory code and with in 20 seconds press the 1/2 key, then enter the 5 digit code you want. At this point both the factory setting and your new setting shoud both work. You only reset or overide the personal setting. The factory setting should always work.
Programming your own personal entry code on a 2000 Lincoln Navigator
1.) Enter factory set 5 digit code (keypad will illuminate when pressed).
2.) Pres 1/2 control within five seconds of step 1.
3.) Enter your personal 5 digit code. Enter each digit within 5 seconds of previous one.
note: Your personal code does not replace the permanetn factory set code. You can use either one to unlock your car.
Wiki User
∙ 2011-09-12 22:23:34Somthing in denmark stinks..........
Each vehicle that has keyless entry has its own code
Look up by the parking brake under the dash board. They used to put a sticker there with the master keyless entry code on it.
where can i find the master keyless entry code for a 2007 lincoln mkx
The number is printed on the side of a relay above the fuse box in the right kick panel.
Enter the keyless entry master code, then hit the 1/2 button. Enter your new code. The door locks will cycle to indicate that the code has been accepted.
how do you change the battery in a 2002 jetta keyless entry pad?
I own a 2003 Navigator and the code is located on the passenger side under the dash. I had to get down with my back on the floor board and I found it on a white sticker behind some wiring on the outerside towards the far right (passenger side). There was a 5 digit code. Take a flashlight and good luck. Rob
A keyless entry code for a 2003 Lincoln Aviator can be found the owner's manual. If a code is not provided, the owner must visit a Lincoln dealership for a new code.
as a ford tech i can say that yes! but it can only be done to your keyless entry pad and at time of key reprogram you will need two keys for this process to be performed ask your ford or Lincoln service advisor for info he can help!!
The Lincoln Navigator keypad entry code can be found in the back of the owners manual. You can only use the keypad entry code once and then you will have to enter your personal entry code.
where is the keyless entry code for a Lincoln twoncare located for a 2003