The Enhanced Warning System (BeltAlert) can be enabled
or disabled by your authorized dealer or by
following these steps:
NOTE: The following steps must occur within the first
60 seconds of the ignition switch being turned to the ON
or START position. DaimlerChrysler does not recommend
deactivating the Enhanced Warning System
(BeltAlert).
1. Turn the ignition switch to the OFF position and
buckle the driver's seat belt.
2. Start the engine and wait for the Seat Belt Warning
Light to turn off.
3. Within 60 seconds of starting the vehicle, unbuckle
and then re-buckle the driver's seat belt at least three
times within 10 seconds, ending with the seat belt
buckled.
NOTE: Watch for the Seat BeltWarning Light to turn on
while unbuckling and off while re-buckling the seat belt.
It may be necessary to retract the seat belt.
By putting on your seatbelt
You cannot deactivate the seat belt alarm. It is installed to keep all riders in the vehicle safe.
The 2007 Chrysler PT Cruiser OBD 2 port is under driver side dash next to kick panel
The 2.4l in a PT Cruiser has a timing belt.
Yes.
5w30
15 gallons
15 gallons.
Red, five year, hoat type.
2.4L inline 4 cylinder
It is under the very rear of the car.
Red, 5 year, HOAT type.