The formula you are looking for is I = W/E. Amps = Watts/Volt.
Electric power = Volts X Amps, so 7 vols at 1 Amp will produce 7 watts 7 volts at 5 amps will produce 35 watts 7 volts at 15 amps will produce 105 watts and so on. Technically, there is not enough information (just volts) to answer your question but if you know the Amps, you can now figure the answer yourself.
You need to have the amperage to determine how many volts you get out of 20 watts.
To answer this you have to know how many volts will be used. If you know the voltage then you can calculate the current by dividing voltage into wattage. For example; an electric heater rated at 700 watts when plugged into a 115 v outlet will draw 700/115 = 6.08 amps of current.
1840
To find amps if watts and volts are known, use the formula; watts / volts = amps or 5000 / 240 = 20.83 amps
Electric power = Volts X Amps, so 7 vols at 1 Amp will produce 7 watts 7 volts at 5 amps will produce 35 watts 7 volts at 15 amps will produce 105 watts and so on. Technically, there is not enough information (just volts) to answer your question but if you know the Amps, you can now figure the answer yourself.
Watts = Amps x volts. What is the current draw and voltage of the calculator.
Impossible to know. You need to know both the voltage and current draw to calculate power (watts). Power in watts = Volts X Amps
You need to have the amperage to determine how many volts you get out of 20 watts.
Yes, power = voltage x current = 54 x 110 = 5940 watts. But the odd thing is the rated horsepower. I was taught that one horsepower = 746 watts, so 135 hp = 100,000 watts. Are you certain that the pump is rated at 136 horsepower? Or can anyone else address the discrepency? W=volts X amps; therefore W= (110)(54)
To answer this you have to know how many volts will be used. If you know the voltage then you can calculate the current by dividing voltage into wattage. For example; an electric heater rated at 700 watts when plugged into a 115 v outlet will draw 700/115 = 6.08 amps of current.
1840
To find amps if watts and volts are known, use the formula; watts / volts = amps or 5000 / 240 = 20.83 amps
approximately 1440 watts. Or a 12 amp draw @120 volts ac. Older units will draw more current. This is the draw after start up.
Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts
For the furnace Watts = Amps x Volts Divide watts by 1000 to get 4.8KW.
The watts is the volts times the amps So 208 x 50 watts, or 10.4 kW.