0
You must first draw out a plan and have it approved by the local building commission. Next, measure out and mark spots equal distance apart for the post supports. Dig a hole roughly a foot and a half deep for each of the marked posts. Place wooden posts in the holes with steel supports on two sides. Refill the hole with dirt and fill the area with gravel. Place wooden exterior bases over the posts to form an "outline" of the ramp. Fill the middle with lengthwise planks made of Redwood or Cedar, nailing each plank to the external outline. Be sure to test the planks after completition. Seal the wood with sealant to prevent damage. You may add a railing using addition 2x4 and attaching them to the external planks.
What else can I help you with?
Example of a ramp?
A ramp is an inclined surface that is used to go from one level to another. It is commonly used in buildings to provide wheelchair accessibility or to help move heavy objects. A simple example is a wheelchair ramp outside a building that allows wheelchair users to enter the building easily.
What kind of simple machine is using a wheelchair ramp to enter a building?
A wheelchair ramp is a type of inclined plane, which is a simple machine. It allows a wheelchair user to exert less force to overcome the vertical height of the steps and enter the building more easily.
What type of simple machine is a wheelchair ramp?
A wheelchair ramp is an example of the simple machines known as inclined planes.
Where can I find information about how to build a sturdy, safe, and secure wheel chair ramp?
You can find instructions on building a wheelchair ramp by visiting www.wikihow.com.
Where online can I find information about how to build a home wheelchair ramp?
You can find information on building a wheelchair ramp for your home at HowStuffWorks. There is information and instructions and you can find this at http://home.howstuffworks.com/home-improvement/construction/projects/build-wheelchair-ramp.htm. Another good source of information and directions can be found on eHow at http://www.ehow.com/how_4614984_build-wheelchair-ramp-house.html.
Do you need a permit to build a wheelchair ramp in licking county?
Yes, in Licking County, Ohio, you typically need a permit to build a wheelchair ramp. This ensures that the ramp meets local building codes and safety regulations. It's advisable to check with the local building department for specific requirements and guidelines before starting the construction.
Do I need a permit to install a wheelchair ramp?
The ADA (Americans with Disabilities Act) has developed Accessibility Guidelines for wheelchair ramps used for public access, with clear specifications and requirements. Check with your State Building Inspector to see if you need a building permit before building any kind of ramp, because in some cases you do.
WHAT IS Blocking wheelchair access ramp to sidewalk CA VEH CODE 22500L?
It is when your vehicle is obstrucing a wheelchair ramp, this can occur while you are parked or even stopped in front of a wheelchair ramp.
What materials should be used to build a ramp?
Any material that is strong and sturdy should be good to use. Http://www.a1-wheelchair-ramps.com/info/building-a-wheelchair-ramp recommends using wood to build a ramp. You may want to visit their website for further instructions and tips.
Is a building permit required for a wheelchair ramp in th town of brookhaven?
In the Town of Brookhaven, a building permit is generally required for the installation of a wheelchair ramp, particularly if it involves structural changes or is intended for public access. It's important to check local codes and regulations, as specific requirements can vary based on the ramp's design and location. Consulting with the town's building department or reviewing their guidelines can provide clarity on the permit process.
HOw do I get a wheelchair ramp built in front of my house?
You must hire a contractor to measure and build a wheelchair ramp in front of your house.
What do you call an incline for a wheelchair?
ramp
