Remove the mirror trim panel ( inside - Triangular piece lined up w/ the outside mirror)...pop/pry this out .....Their should be three bolts.....tighten them if they are loose....If that does not fix it then remove the 3 bolts and if you have power mirrors unplug the connector as well ......then see if the if anything is bored out or mis-threaded! hope this helps
the tacoma has calipers on front.
what is the cost of repair of Toyota 4runner exhaust manifold
You bring it to the Toyota dealership and pay them to fix it.
The 2003 Toyota Tacoma OBD 2 port is under driver side dash next to center console
Remove the door panel and there should be about 3 nuts/screws holding the mirror on
Depends on the driver and the tires.
on the inside of the door, opposite of the mirror there is a plastic cover, remove the cover and the bolts holding the mirror on will be exposed.
On the basis of seat belts, three passengers plus driver in the standard cab and four plus driver in the extended cab. www.toyota.com/tacoma/
a Phillips head screw driver
Listed on the driver's door post.
Working on the SRS is very hazardous. Leave this repair to a professional.
After the repair, you reset it with an OBD2 scan tool.