If there is no ground wire connect the ground wire to the neutral wire.
The end sockets have to be rewired. The schematic for the rewire is on the ballast label.
A NEMA 5-20 plug is a standard 3 prong plug. It wires the same as a NEMA 5-15 plug (Ground wire to the "D" contact, Hot to vertical terminal and neutral to the horizontal terminal (with the Ground terminal either at the top or bottom)).A 5-20P plug has the neutral blade rotated 90°. The 5-20R receptacle usually has a T-shaped neutral hole, to accept both 5-15P and 5-20P plugs.
The usual procedure is to remove the old wire and replace it with new wire.
coil on side of fly wheel broke of can refit but want to rewire bike from start to finish key start to cut of switch to coil whole bike but need to know lay out of wiring of bike and replace all wireing
Nfpa 70 2008 nec 200.7 (c) 2
Yes, if you rewire the bed and rewire the plug on the wall to 220 volts.
YOU BUY A PLUG IN HARNESS, AND REPLACE THE WHOLE THING , THEY ARE USUALLY AROUND 150-200.00
Splaat Gets Ungrounded For Nothing
You don't need to rewire the deck. DONT CUT your stock plug off, but go to napa, autozone, shocks whatever and buy a stereo plug, they are color coded with a diagram, then connect the wires. if you're dealing with the problem of relacing the radio after someone has cut the wires to steal it then you might have to salvage the end from a salvage yard and then rewire it back in if you need help wiring goto www.the12volt.com the have diagrams
Splaat Ungrounds The Colored Splaats And Gets Ungrounded
Splaat Goes Back To School And Gets Ungrounded
Splaat Behaves At Toys R Us And Gets Ungrounded
The only way to get ungrounded after sneaking out is to talk to the person who grounded you. They may not lift your punishment no matter what.
"ungrounded" = floating.
be polite
If your trying to plug in a 110 Volt lamp into 240 volt outlet the answer is simple. You must buy a step down transformer, or your lamp will burn out.
If two ungrounded (hot) conductors touch or an ungrounded and a grounded (neutral) conductor accidentally touch, it is called a short or short circuit. If an ungrounded or a grounded conductor touch an equipment grounding conductor, it is called a ground fault.