There are different types of light. Some you have to turn on, some they are automatic light (they turn on right when you start the car)
Probably needs a new light switch. If you jiggle the switch do they flicker?
it stays on , it has dowel pins sorta to guide head and hold gasket
Getting/giving a bj while driving?
How do your remove the lamp housing from a 2002 silverado driving lights? I can remove the upper head light housing but I can't get the driving light housing out.
check the ground wire stemy. from the batter neg to the neg on the head light neg side
You may have your car's emergency lights on. This is usually toggled by a button with a red triangle on it. Otherwise, check your instruction manual.
=I don't know about the brake lights. I know that most cars, when you turn it off and get out, the head lights and main backlights stays on for a while but then goes off. The brake lights? Maybe it's the way that car is or something is wrong with the brake or you have it on wrong.=
i had the same thing happen to me. i changed the light switch and everything was good again, but always be sure to check the fuses first.
500feet of an approaching car within 300 feet of a car in front of you when driving on lighted roads when driving in bad weather
Good chance you have a bad head gasket or a cracked head.
your day light driving module could have failed.
A posidrive screw stays centered over the driving tool. On Slotted head screws, the screwdriver can slip easily out of the groove. A very nice kind of screw is the "TORX" head screw. With the proper torx bit, they cannot slip or strip easily while screwing them into wood or metal.