answersLogoWhite

0


Best Answer

speed sensors are on the transmissions or transfur case if it is a 4x4, You must be asking about a ABS. wheel sensor ( anti-locking brakes ) Just follow the wire down to the back of the wheel and remove the small bolt that holds the sensor in place and remove sensor. The other end of the wire up in the fender well just unplugs.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do Install Speed sensor install on 1996 through wheel well?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How can you install a speed sensor on 1997 Nissan Altima?

where is 2005 Nissan speed sensor located


How do you change the speed sensor on a 98 integra?

Remove the wiring harness from your speed sensor. Remove the speed sensor retaining bolts. Reverse the process to install your new speed sensor.


How do you replace the speed sensor on a 89 Olds Cutlass Ciera?

Raise the vehicle and locate the speed sensor. Remove the electrical plug. Turn the speed sensor counterclockwise and remove it. Install the new speed sensor.


How do you install a speed sensor on a 1994 Ford Explorer?

It is in the differential and secured by a 10mm bolt.


Do you have to calibrate the speedometer when replacing the speed sensor?

No, you do not as the computer does it, provided you install the correct one.


How do you install abs speed sensor on 97 Chevy suburban?

first step you must removed the tire then the brakes then the four 15mm bolts head then you can access the abs sensor then reversed to install it


How do you find out how to install a vehicle speed sensor?

The VSS is above the rear differential, mounted on the bottom of the truck bed, very simple to install, its about $30 at autozone.


How do you install a speed sensor on a DX 93 Honda civic with automatic transmission?

Take it to the dealer


How do you install a speed sensor on a 1995 Honda Accord?

where is the speed sensor located on a 1995 Honda lx accord, 4 cyl where is the speed sensor located on a 1995 Honda lx accord, 4 cyl


How do you install a speed sensor in a 1992 Honda Accord?

First start by removing the intake. Then drain the coolant and remove the lower radiator hose from the engine. This will help with the removal and replacement of the speed sensor. Directly below the throttle body on top of the transmission differential will be the speed sensor. You need a 10mm socket with an extender to remove it and there are three bolts. Be careful not to lose the little rod inside the speed sensor. Reverse the process to install the new sensor.


How do you install need for speed-Porsche Unleashed?

how to install nfs5


How do you install a transmission speed sensor on a 2001 Ford Taurus?

disconnect negative cable to battery, disconnect plug from sensor, remove the 3 nuts and pull out.