Wifi enabled tablets connect security by the security that's setup in the wifi router. If you can connect to the wifi without needing to input a password then your internet is likely not secured. at&t has setup wifi service what do you do next?
A wireless router with internet service.
If you don't have a WiFi router of your own, then someone else's WiFi network with Autherication password.
when im not connected to the internet, the computer will run fine. when i turn on the wireless internet connection, the computer turns off and the same happens when i use a wire to connect to the internet.
Wireless Enabled is a system normally on laptops which allows you to access the Internet via an existing Internet connection. For example; If you buy a laptop which is wireless enabled, and you wish to get on to the Internet then you can do if you have a computer which has the Internet or a wireless router. If you have neither of these items (a computer or a wireless router) then I advise you buy a wireless router and then you can connect to the Internet wireless. From Whiz-Tech 915.
An ethernet cable is a network cable that is used to connect your computer or other web-enabled device to the internet. You can use an ethernet cable to establish a wired connection from your computer to a router or modem to connect to the internet.
You can connect to the Internet with the Dell Inspiron 1100 by connecting to an internet-enabled LAN using Ethernet cable. Another way is to connect a wireless modem through its USB ports.
To use a Bluetooth dongle, it must first be plugged into the USB drive of a computer. After it is opened in the control panel on the computer, it is ready for use.
Yes, if you have wi-fi.
To connect to the internet via wifi you will need: A wifi enabled laptop/pc OR a wifi card/adapter. A wifi router/network with the internet connection connected to it. As long as your router is set-up correctly and your laptop is fairly new you shouldn't have any trouble connecting to the internet.
The definition of a bridging point is where something goes through something to connect. Diagram: Computer with no internet > Computer with internet >> Internet. The bridging point would be between the first ">" and the ">>" means both computers are now recieving internet. For example in computing: some computers do not have a wireless device installed, so to bridge a computer to a computer that has wireless you need a CABLE, the computer that is connected to the internet-enabled computer would be the bridge, and the start point would be between the computer that has not got internet, to the one that has. Hope this helps, and that you can understand it.
'No modem present' generally means an error with the connection to the internet. The Modem is the middle component between the router and the internet, it recieves data from a jack that allows internet access, which is passed through the modem to the router so that wireless enabled devices can access internet. A computer can connect directly to the modem in order to gain internet access and a router is optional not compulsory.. Without a modem, you cannot recieve internet access. Diagram: Internet jack > Modem > Router > Wireless enabled device.
You can connect them using network wired or wireless (if available in Xbox) how to make a network 1) a LAN switch (with in 60 $) a straight LAN code (with in 10$) from Xbox to switch (length as needed) connect them and your PC too. if you have a ADSL connection then connect your router to the switch using a lan code. (if your ADSL or internet connection is connected to your PC additional setting are required). go in Xbox setting and then in network setting assign IP address( is dhcp enabled router it will work directly)
The PSP is wi-fi enabled already, it can make an internet connection with that. There's no need for any additional components.
The most obvious answer would be, they enabled a password.