Park on a horizontal surface. Get tire iron out. If needed, remove hubcap. Break loose but don't remove the wheel nuts. Tighten hand brake, put car in gear. Get the jack out. Position jack under car at the appropriate place. Jack car up, undo the wheel nuts all the way. Pull wheel off. Roll current wheel aside. Install spare wheel, tighten nuts lightly. Lower car to ground. Do up wheel nuts tight. Pack away tire iron, jack etc and drive.
It should be --- The professor is running late; she had to change a flat tire.
you can't
You can change a flat tire on a Ford Taurus Wagon by first removing the lug nuts, pulling it off, and replacing with the spare tire.
He high jacked it
it is the wrench that removes the nuts on your tire rim when you change a flat tire. It is a specific size for each brand of vehicle, so make sure you have the one that you will need on a dark rainy night ti change that flat tire.
This enables a flat tire change with a spare tire en route.
Are you really prepared for the next time you get a flat tire on the highway? If not read on ....... This page was made for information purposes to educate the public on how to properly and safely change a tire. It serves as a guide for changing a vehicle's tire when a flat occurs. Every time you drive your vehicle, there
Very fastly, if the car is still moving. :-)
To change a flat tire you need a jack, tire iron and a new tire. Jack the car up and remove the bolts, you can then slide the old tire off and replace it with the new one.
Depends; Are You Going To Just Remove The Tire From The Vehicle Or Remove The Tire From The Wheel. If Just Removing The Tire From The Vehicle Yes Do This As You Would Change A Flat. To Replace The Tire Or Tires. You Will Need To Remove The Tire Or Tires & Have New Tires Installed At A Tire Shop. Sears, Wal-Mart, Ect. Good Luck
You need a jack and a wheel brace (wrench)
put car in park. loosen lug nuts on flat tire. jack car up just high enough to remove flat tire. remove lug nuts. remove flat tire. replace with new tire. put lug nuts back on and tighten. lower jack. drive away