gearbox u mean transmission or motor either way u should have a dipstick on each one
It allows the driver to disconnect the engine from the gearbox, so that the gear can be changed. The new selected gear can then drive the wheels when the cluch is released.
my 87 kx 80 bigwheel has the same problem. it needs a new water pump gaskett
This is a hands-on experience, however this does not accept young drivers without a parent. This is becuse the New Driver Car Control Clinic believe that to be successful, the young driver needs to be able to experience it with an adult guide.
inside the gearbox any trouble you get with a gearbox drain and refill with new ATF.
Hi there is a 24mm bolt on the gearbox on the under side. And then put the new oil in by the dip stick.
i dont know cuz i dont have one and it new
When it stops working
check the fuse u may need a new one (easy write near battery wire) if not the gearbox can be locked up or ur charger is bad
The mountings on the top will differ. It should fit the engine ok, but you will need to fabricate a new cradle to match the car's gearbox mounting position.
theres a problem with the cvt - gearbox. apparently theres been a change from a 5 plate clutch to a 7 plate clutch so you have to basically get a new gearbox and if its one of those multitronic ones then you are looking at around £2000 for a second hand one. get rid of the car if you can, and avoid buying any with a cvt gearbox. theres a problem with the cvt - gearbox. apparently theres been a change from a 5 plate clutch to a 7 plate clutch so you have to basically get a new gearbox and if its one of those multitronic ones then you are looking at around £2000 for a second hand one. get rid of the car if you can, and avoid buying any with a cvt gearbox.
Yes, albeit new engine and gearbox mounting need to be fabricated.
I dont know, but is is ugly!!!!! She needs to get a new hairdo.