Well you cannot get arrested for not knowing it nor is the lack harmful.
You cannot program the remote unless you know the make and model of the equipment it is to control.
To program codes in a GPT universal remote control, RM-788, first you need to know the make and model of your television set. Then you find that code number on the pamphlet that came with the remote and enter it on the remote.
To program your universal remote, you will need to know the brand of remote that you own. Once you have figured that out, go to the website of the manufacturer, and they will have instructions listed on how to program your remote.
I don't know which model you have, but try this: http://www.wikiremotes.com/cf/support/productresultsp.cfm?categoryid=648
It would help to know the brand of remote you have. Always check the brand's website first as they often have the old manuals and codes on their site. Otherwise do a search engine search for the brand and model.
No
The SC-PT75 doesn't have a programmable remote control itself. In order to know what codes to recommend to control this product, We need to know which remote control from which device you are using. Every manufacturer has a different code system to program their universal remotes.
I don't know about your remote, but try these: 10178, 10463, 10765, 10150, or 11498.
We will need to know the brand of your TV and the model of the remote to know what code to give you.
You can buy a universal remote that will work with your brand of VCR if you lose your current one.
I know this tv can be programmed with just about any universal remote or cable remote the onoly problem I've come across is once i programmed the remote and tv if i try to turn the volume up or down the channel goes up or down
I NEED TO KNOW HOW TO PROGRAM A INNOVAGE UNIVERSAL JUMBO REMOTE
Turn on the component you wish to sync to your universal remote--your television, DVD player, VCR or stereo.Point the remote at the device you are programming and press the corresponding device button on the remote. These buttons are labeled "TV," "VCR", "DVD," etc. Hold the device button for three to five seconds.Push the power button on the remote. This should turn on the device that you are syncing.Push the "Channel Up" or "Channel Down" button on your remote gradually until the device that you are programming shuts off.Press "OK" or "Enter" on the remote once the synced device turns off.Press the device button for the component you just programmed, and hit the power button while pointing the remote at the component. If programmed correctly, the device should turn on, and you should be able to control it with your Living Solutions Universal Remote.