Want this question answered?
To remove melted plastic from a wood floor, you will need an iron and brown paper sacks or brown craft paper. Lay the craft paper over the plastic. Apply the hot iron to the paper and apply pressure just until the plastic becomes soft. Once the plastic is soft, peel it off the wood floor.
Heat up the iron again--to its highest heat. Try using a blade to carefully scrape off the plastic. They are available in every hardware store. Run the iron over a cloth-covered piece of wax to remove the residual amount.
It is history. The paper bag and iron is for wax. If you did that first, you just melted more plastic into the fabric. It will not come out. If you had froze it first, it might have popped off, or it may have already been into the fabric.
if a 50 g of iron gets melted how much liquid does it produce
2800 degrees Fahrenheit (1538 degrees Celsius )
You don't, you remove the plastic junk and replace the toxic plasatic with cast iron
molten
When Pig Iron is melted and recooled it is called Cast Iron
To remove melted plastic and fabrics, heat at low setting just until material softens, and scrape off with a smooth piece of wood, a wooden spatula or half a clothespin. If some remains, make a paste with baking soda and water and rub or try silver polish. Wipe off with damp cloth. For a non-stick soleplate, rub gently with nylon mesh pad and suds. Acetone or nail polish remover may remove melted polyester.
Simple. With a magnet. The iron dust will simply be attracted to the magnet. To collect the iron dust neatly, get a plastic sandwich bag or a small plastic baggie, put the magnet inside, use it to collect the iron dust, then turn the bag inside-out and remove the magnet.
core
Iron is a solid, unless it has been melted into a liquid.