0
How do L1, L2, and L3 work
Ottis Dickens
Add your answer:
Earn +20 pts
What is a Transitive Property of Parallel Lines?
If L1 is parallel to L2 and L2 is parallel to L3 then L1 is parallel to L3.
If you have 3 light bulbs explain how you can determine they are connected in parallel circuits by unscrewing one bulb?
Unscrewing any light bulb in series will result in the others turning off. If they are in parallel, unscrewing one will have no effect. For example, say we have lights bulbs L1, L2, and L3, where L1 and L2 are in parallel and L3 is in series with L1 and L2. If L1 is unscrewed: L2 and L3 will stay lit. If L2 is unscrewed: L1 and L3 will stay lit. If L3 is unscrewed: L1 and L2 will turn off.
What voltage would be measured from any phase to ground on a 480 volt 3 phase wye system?
A voltage of 277 is the line to neutral (ground) voltage of a 480 volt wye three phase system. L1- N, L2 - N and L3 - N will give you 277 volts. L1 to L2. L2 to L3 and L3 to L1 will give you 480 volts.
Do current processors have L1 and L2 caches?
l1 is in motherboards l2 is on processor newer processor has l3 too
What cache does a itanium utilize?
L1, L2, and L3
Is 277 volt one hot wire?
No, 277 volts is the line to neutral of a 480 volt wye three phase system. L1- N, L2 - N and L3 - N will give you 277 volts. L1 to L2. L2 to L3 and L3 to L1 will give you 480 volts.
What is a perpendicular with paralles lines?
If there are given two parallel line L1 and L2, and a third line L3 that is perpendicular to L1, then the line L3 must also be perpendicular to L2.
What is the maximum L1 L2 L3 Cache size.?
L1 = 128KB MaxL2 = 4MB Max
What type of cache does the Itanium utilizes?
It uses L1 L2 and L3.
What is the solution to soukoban level 17?
U1, l2, d1, l1,u1, l2, d3, r1, d1, r2, u1, l2, r1, u2, r1, u1, l2, r1, d1, l1, r1, d3, r3, u1, l2, d1, l1, u3, r1, u1, l1, r3, d1, l3, r2, d2, r1, d1, l3, u3, r1, d1,r1, d1, l2
The solution to level 26 on Soukoban?
U3 L2 D1 R1 U1 L3 D1 L1 D3 L1 U1 D1 R3 U1 L2 D1 R4 U1 R1 U2 R1 U1 L2 R1 D3 L1 D1 L4 U3 R4 U1 R1 D1 L3 U1 R2 L3 D1 L1 D3 L2 U3 R6 L6 D1 R1 D1 L1 D1 R1 U1 R3 D1 R2 U1 L3 xauyala
What voltage reading would you get from a 277 480 volt system?
From a three phase four wire distribution system the voltages would be as follows. From L1 to N - 277 volts. From L2 to N - 277 volts. From L3 to N - 277 volts. From L1 to L2 - 480 volts. From L2 to L3 - 480 volts. From L3 to L1 -480 volts.
