The noise is simply made by air vibrating down tubes of different lengths and diameters.
Blowing across the tops of the tubes sets up a vibration. The frequency (pitch/note) is determined by the physical dimensions of the tubes.
If you blow across the top of an empty bottle you will hear a note. Try blowing across the top of a different sized bottle, or a bottle partly filled with water and you will get a different note.
Pan pipes are constructed to take advantage of this phenomenon.
Because modern PVC and PEX pipes are much more efficient and easier to work with.
The steam flows through a grill of pipes and the heat radiates from the pipes to the room.
it works because water travels up the pipes then comes out of little holes in the pipes. and a mechanism moves the pipes
Red
yes
You gotta connect the pipes together to make it to the other pipe but you gotta work fast
It muffles the sound of exhaust rushing out the pipes
Carpenters work with the manipulation of wood while Fitters work with the pipes that go through the wood-- more wood goes into a house than does pipes. Is this the answer you were looking for?
To hide pipes, wires or duct work.
when it was dry the water cannot do anything to clay
It is screewed into the exhaust pipe / pipes. Start up at the engine where the exhaust pipes bolt to the engine and work your way down the pipes towards the muffler and you will see it.
The best type of cutter for PVC pipes is a ratcheting PVC pipe cutter. It provides clean and precise cuts, making it easier to work with PVC pipes.