Richard G. Drew, who had developed masking tape in 1926, took the idea a step further, and on May 27, 1930, he and his employers at the 3M Company received a patent for cellophane - aka scotch - tape. 3M's main product before that was sandpaper. Drew was delivering sandpaper to auto manufacturers, and saw that they were having trouble keeping a neat line between the colors on two-toned cars. He came up with an adhesive tape that would lift easily off the car, without lifting the paint at the same time. When he then invented the transparent cellophane tape, it became a consumer favorite.
3 -5 turns DEPENDING on the thickness of the tape as cheap tape can require up to 8 turns or more
a pop-up is typically found in a bathroom sink. It is the device that allows you to hold water
You pop up pirate
First, make sure the pipe threads are clean and in good condition. Hold the end of the tape flat against the pipe threads, flush with the end of the pipe, then turn the pipe clockwise, or as though you were tightening it. Put 1-1/2 to 2 turns of tape on the pipe, keeping the tape flat and tight against the pipe as you turn, then thread the pipe immediately into the fitting. The reason for doing it this way is so the loose end gets pinned down by the action of screwing the pipe in, rather than getting flipped up.
It's the commercialised name for some products which come from Scotland such as, Scotch Tape, Scotch whisky, Scotch broth. Shortened from Scottish (and after a few whiskies most people end up blurring Scottish in to Scot-ch)
Not very. If it's an irreplaceable photo, have it professionally mounted. If it's not super valuable or important, put it in a cheap photo album or frame. If you don't care if it gets messed up, tape it up on the wall or stick it to the fridge with a magnet.
If its just a little ripped , then tape it up neatly with scotch tape, making sure it lines up back and front.
Tape made up of rampickfel atoms. you put labels on it
If you put tape on it you can hang it up ;)
Yes it burns similar to plastic. Goes up quick and melts. Bad fumes so keep your distance.
No, or the flute will get messed up.
Use scotch tape around all edges and then remove rest with nail polish remover.
at the part where you blow it up Take a piece of tape and place it over the outside of the balloon. Poke the needle through the tape and through the surface of the balloon. The balloon will not pop because the surface of the balloon cannot expand, thus popping the balloon.
What I did, was: poke out the lenses of cheap 'ray-ban' looking sunglasses, and put scotch tape in the middle. Then wear as short of shorts you can with knee sock and a button up shirt. If your dad has a bow-tie, that would be cute too :D
It causes the veins to pop up and become easier to inject into.
For removing lint from clothes, purchase a roller made for that purpose. The roller will have either scotch tape on it or perhaps some cloth substance that picks up lint.