175Nm
The rear hub nut torque settings on a Renault Clio should be set at 175Nm this is what holds the disc in place.
30mm
77mm
30mm
32 mm
The torque settings for the rear hub nut (in the Haynes manual) is 175Nm or 127lb ft.
Remove the tire and wheel. Remove the brake assembly and rotor. Remove the axle end cap. The rear hub assembly will come off.
Remove the rear wheel, then the wheel hub should be on four bolts. Remove the bolts and remove the hub. Very easy job.
Loosen and remove center hub bolts Slide axle out Remove spanner nut Remove drum
You have to remove the center of the axle plate and the axle to remove the brake hub.
The rear drums come off with the rear wheel hub. You Jack up the car, remove the wheel.Remove the cap in the center of the hub. Take the cotter pin out, unscrew the wheel bearing retainer nut. Pull drum and hub off as an assembly.The rear drums come off with the rear wheel hub. You Jack up the car, remove the wheel.Remove the cap in the center of the hub. Take the cotter pin out, unscrew the wheel bearing retainer nut. Pull drum and hub off as an assembly.