0
What else can I help you with?
What is the stock sprocket on a raptor 660?
13t front 40t rear
What is Best sprocket combination for drag racing raptor 700?
I run a stock rear sprocket and 15 front. does great for 500 ft drags
Rear sprocket size for a 04 Yamaha yz450?
going by all the other yamahas raptor banshee blaster i would say its a 40 tooth Yamaha always goes with a 13 tooth front sprocket and a 40 rear
What is the stock rear sprocket size for a Yamaha 350 raptor?
The stock rear sprocket size for a Yamaha Raptor 350 is typically 40 teeth. This configuration provides a balance between acceleration and top speed, making it suitable for various riding conditions. However, it's always a good idea to check the specific model year, as variations may exist.
How fast is a raptor 700 turbo?
120-130 with exhaust smaller sprocket
When your in low gear what sprocket are you using?
It depends on whether you are talking about the front sprocket (the one at the pedals, called a chainring) or the sprocket at the rear derailleur. The lowest gear at the front is the smallest sprocket/chainring. The lowest gear at the rear is the largest sprocket. So if you combine the smallest sprocket at the front with the largest sprocket in the rear you have the lowest gear available on your bike.
What kind of sprocket do you want for a small bicycle chain?
well if you have a 8 tooth rear driver you will need a 23t sprocket, if u have a 9 tooth rear driver you will need a 25t sprocket, if u have a 10 tooth rear driver you will need a 28t sprocket, and if you have a 11 tooth rear driver you will need a 30t sprocket
What is the top speed of Honda 400ex with aftermarket rear sprocket?
depends if the sprocket is bigger or smaller than a stock sprocket.
How do you remove the rear sprocket on a polaris 90?
To remove the rear sprocket on a Polaris 90, first, ensure the ATV is secure and on a flat surface. Remove the rear wheel by loosening the lug nuts and taking off the wheel. Then, locate the sprocket bolts, typically found on the rear of the sprocket, and use the appropriate socket or wrench to unscrew and remove them. Finally, detach the sprocket from the hub, and replace or service as needed.
What size sprocket is on the rear of a suzuki bandit 1200s?
The chain is size 530, and the stock gearing is 15/45, meaning that the front sprocket has 15 teeth and the rear sprocket has 45 teeth.
What is the best sprocket for Yamaha crypton s?
The best sprocket for the Yamaha Crypton S typically depends on your riding style and needs. Many riders prefer a 14-tooth front sprocket paired with a 40-tooth rear sprocket for a good balance of acceleration and top speed. However, if you're looking for improved acceleration, you might consider a smaller front sprocket or a larger rear sprocket. Always ensure compatibility and consider your specific riding conditions before making a change.
How do you change the front sprocket raptor 660?
straighten the bent washer, Did you buy spare lock washers? remove the nut, 1-1/4" or 32 mm, I stand on the rear brake loosen the chain adjustment work the front sprocket out if the chain, it's tougher with a 14 tooth install new sprocket Don't forget to bend the washer back over the nut if you have the stock chain it might not have a master link so i cut mine but there is a way to take it off without cutting .
