Want this question answered?
S/pdif
The front wheel bearing is a sealed unit with the wheel hub - replace the hub and wheel bearing unit. Remove the four bolts from the rear of the steering knuckle that connect to the hub bearing unit.
i believe you will have to drop the tank and the PUMP-SENDING UNIT-and FILTER are an assembly in the top of the gas tank.........
I think those are separate in 94 on Chrysler products. If you call a parts store they can verify it.
Not Otherwise Specified
An electric warming tray simply has a heating unit built into it. The unit however only stays around 200 degrees or lower to keep the food warm, not cook it. Some of the better warmers will have lids.
The electronic control module or unit on a 2003 Mini Cooper is located under the hood. It is on the rear of the intake manifold.
If is a 2 stage air conditioning unit. You might want to replace the furnace.
you have to remove the fuel pump it is connected to it, it has to be replace as one unit
To stop a leaking window unit follow these instructions. 1)Pull the air conditioner from the window. 2)Place the air unit on a firm surface. 3)Use the screwdriver and remove the outer metal housing of the air conditioner. 4)Observe the inside of the air unit. Note that there is a plastic drain tray on the bottom. 5)Pour some house bleach into the plastic tray. 6)Connect the garden hose to the outdoor spigot and attach the spray nozzle to the hose. Spray in the interior of the air unit with the moderate pressure from the spray nozzle. 7)Force the water into the plastic drain tray and remove all of the solid debris that is laying there. Place another cup of bleach into the plastic drain tray and allow the liquid cleaner to set for about 5 to 10 minutes than thoroughly rinse the unit with fresh water. 8)The inside area should be thoroughly clean. Allow the unit to completely dry in the sun. When dry, replace the exterior cover and place the unit back into the window. 9)The unit will be cured of leaking
There is no accepted unit called the "mini second". You might be confusing nano- or milli- for the prefix.
you have to remove the gas tank as the pump is in the tank once the tank is removed you have to undo the lock ring wich holds the sending unit in place this is were you will find the fuel pump get a new ring and gasket when you replace your sending unit drive safe