0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What position do the spark plug wires go on the distributor on a 5.7liter 350 Chevy?
What is spark plug's position? tell me.
Why does your rotor misfires on 3 points on a Chevy 350 plugs 258?
Sounds to me like you need to replace the spark plugs, spark plug wires and rotor. If the condition still persists, replace the distributor cap.
How do you run spark plug wires on a Chevy 350?
change only one wires at a time,matching each to length.
What is order for spark plug wires diagram for a 75 cutlass 350?
The firing order is 18436572.
Can you put plug an plug wires off Chevy 350 carbarated motor on a 97 Chevy 350 vortec fuel injected motor?
No. the plug wires are made different and the spark plugs ae NOT the correct heat range.
What causes a yellow spark at the plug of a Chevy 350 you have power to the coil and the ignition control module It has a crisp blue spark from the plug wire but not at the plug?
poor spark plug gap bad wires or weak coil or bad spark plugs
Where do the spark plugs go from the cap to the plugs on a 92 caprice classic with a 350?
Ummmm......... I think you want to use spark plug wires.
Is a 452 engine that belongs in a 1997 Ford F-350 gas?
In a 1997 Ford F-350 the 460 cubic inch / 7.5 liter V8 engine is a gasoline engine . It has ( 8 ) spark plugs and spark plug wires .The 7.3 liter V8 / 445 cubic inch is a diesel and has no spark plugs or spark plug wires
What is the firing order of the spark plug wires to the distributor cap for a 1987 Chevy silvarado 350 engine?
18436572
What order do the spark plug wires go on the distrebuter on a 350 Chevy v8?
The same as on the intake 18436572 clockwise.
How hard is it to change a distributor panel on a 1996 Chevy silverado 350 Vortec Z71?
Distributor panel?? If you mean distributor cap, you first move the air intake going to the throttle body. Mark all spark plugs wires with the correct plug and unplug each one at the spark plug. Next you will find 2 screws holding the distributor cap. Remove both screws and and lift off the cap and wires while the wires are still connected to the cap. Take the spark plug wires off and place them onto the new cap in the same position you removed them. Put new cap on and tighten the screws and replace the wires to the correct spark plug. You should replace the wires and rotor button when you do this also.
Order of the spark plug wires on the 350 motor?
1-8-4-3-6-5-7-2
