Turn the ignition over without starting it, push the gas pedal down all of the way three times within 5 seconds, The light will flash indicating you were sucessful, turn ignition to off this locks the reset then start your car and the light should go off. If this does not work, repeat procedure. This worked on 2003, 2004, 2006 envoy, and is suppose to work on all year models.
Also check your GMC owners manual under systems management.
To reset the service engine soon light on a 2004 GMC Envoy you can remove the ECU fuse. ECU stands for electronic control unit.
how do you reset change the oil light in a 2004 alero?
The abs light is on because there is a problem with the abs system. The light will remain on until the problem is fixed. Once the problem is fixed the light will reset itself after a short drive.
How do you change the lower ball joints on an 2004 envoy
Disconet the battery for 15 minutes this will reset your oil change light
No such thing.
Disconnect battery for about 5 minutes. Then connect it back. Should reset radio.
The check engine light has nothing to do with an oil change. The check engine light is reset with a scan tool after repairing the failure that caused it.
To reset the oil change light, hold down the odometer and clock buttons for a few seconds. (with the ignition turned on).
How to reset service light on a 2004 grand am
Start the car push the trip button until you get to engine oil and select reset and you are done.
there are 2 tabs on the top of the housing, pull up on them to release the head light, pull the housing forward to remove.