Use this program: https://sourceforge.net/projects/turnoffxboxcontroller/
pull the battery pack out for just a second
Off Radio Waves.
To connect your wireless controller to your console:Press and hold down the Xbox Guide button or the Startbutton until the controller turns on.If your console is not on, press the power button to turn on the console.Press and release the connect button on the console.Press and release the connect button on the controller.After the Ring of Light on the controller and console spin and flash once, the controller is connected. The quadrant that remains lit indicates the controller's position.To connect, or bind, additional wireless controllers, repeat this procedure for up to four controllers.To disconnect a wireless controller, press and hold the Xbox Guide button for three seconds, and then turn the controller off.
either something inter fears with the connection,battery life drains--AND OR if you dont know the Xbox 360 Wireless Controller has a 5-Minute Idle turn off
Turning Xbox 360 OffTo turn off an Xbox 360 off hit the power button or if you have a controller scroll right and at the bottom it should say 'turn of Xbox 360'
Then your Xbox 360 will shut off, of course. There are no negative consequences to this.
I belive its under settings.
Theres a little button on the 360 and the controller. Make sure you are holding both buttons when turning on the controller.
You will have to turn off your vibration on the controller in the game options. You cannot turn it off in any system settings.
To check it, just turn on your xbox. If working fine, its not damaged. If it doesnt turn on, you can either get it fixed by Microsoft or just use your controller to turn on/off your console.
ther is battery gow evrery whare
Start with a wireless controller, then get a headset, and top it off with a hard drive upgrade.