The best way to make a fire burn hotter is to use the hottest burning logs that you can. Oak, Ash and Black Locust burn very hot. Feed them into the fire along with fast burning wood such as Maple to keep the fire raging. If you do not burn a fast burning wood with the Oak and Ash, they will burn very hot, but very slowly. The object is to make as many red hot coals from the Oak and Ash at the base of the fire as possible. That is where the heat from your fire will come from and the more coals the hotter the fire will feel. Additional information for those seeking info on other than fireplace fires It also helps to make a low side base surrounded by something and make it narrow at the top, so that all the fire is more focused in one spot. using all these ideas was what made the first copper, silver, and gold things. you may ask yourself how can you make a fire so hot that it burns metal but not whats surrounding it. rocks, carefully build rock kilns.
No. I have burned plywood. It is made of layers of wood glued together. The wood remains flammable and the glue might be flammable. A wall made of plywood might block a fire for minutes but will burn through.
You have to, or the fire is going to burn way too hot and not last very long. Depends on the type of wood you use also.
I have a wood stove and have burned cedar in it for years, it is completely safe. Recently alot of cedar trees have died on my property so I have had an abundance of the wood. It burns alot faster than oak so i mix the two for a longer lasting fire. Enjoy
Well is the question the total amount of heat, or total USEFUL heat? In general, a wood fire burns a bit hotter than gas- hence the wood fired pizza ovens. Hoever, gas fireplaces usually have a heat exchanger that draws in room air, warms it, and returns it to the room. It has less air going up the chimney than a wood fireplace (a major point of heat loss) The chimney of a wood fireplace may be more massive brick, which will hold heat after the fire burns out.
no. you must have a flue that properly vents to the outside. you will burn your house down if you try to start a wood fire in a vent free fireplace.
for wood to burn you need fire
Up to a point, increasing the draft gives a hotter fire. That is why you open the front air ports to increase the temperature of the burn. It also uses more wood, since it is burned more quickly.
Is there anything can appy to make pine wood burn in the fire place
for wood to burn you need fire
Yes, you can burn apple wood in a fireplace. It generates very little smoke and hotter than normal firewood. It is a good heat output with a small visible flame and ideal for wood-fire. It is a safely and efficiently burned in fireplace.
Burning is an exothermic reaction.
Yes and for longer. Coal is essentially compressed wood.
Dry wood, fire, ect, oxygen, and a spark are things that are needed for fire to burn.
One way for a fire to burn at a different temperature is it's wood soft wood such as pine burn fast and hot but hard wood such as muscle wood burns slower and cooler but still hot enough to burn you so don't touch it
Yes you can! Maple is one of the better fire woods to burn. Just make sure it's dry & not green wood.
Fire burn changes the wood chemical.
A bellows injects O2 into the flame causing it to burn hotter. Much like blowing on a hot ember while trying to get a fire started.