0
Warning: This is NOT a detailed tutorial but rather an overview of the concept that omits any mention of basic electrical safety procedures or any existing wiring alternatives or obstacles you might encounter. If you are not familiar with electrical code and permits, do not attempt this.
Split the hot/black wire and put the side coming from your service panel on the top lug of the switch, and the wire going to the receptacle on the bottom lug. Don't forget to connect your ground to the switch. Depending on your application this may not be legal under the current electrical code.
Wiki User
∙ 11y ago
Wiki User
∙ 13y agoYou can buy a device that contains one outlet and one switch. In the current box you have t identify the supply side Black wire (Hot). This can be done with a voltmeter. Connect the supply side black to the switch and the brass colored screw on the outlet. Connect the white wire to the silver screw on the outlet. You may need to use a wire nut and multiple pigtail wires to feed the input to switch and outlet. Depends on configuration of the switch/outlet combination.
Add your answer:
Earn +20 pts
Electric wall socket stopped working why?
Try checking your breaker panel for a tripped breaker, sometimes they can trip and it appears to be on still, to be sure turn off all single breakers completely to the off position to reset and then back to the on position. or There could be a switch controlling that paticular recepticle also, so check all switches in the area to be sure that its not just turned off. Sometimes recepticles are wired as (half hots) which means that half of the recepticle is always hot and the other half is switched. Also they can switch the entire recepticle with a switch(both sockets or halves). finnally The connections in one of the boxes between the recepticle and the breaker could be loose preventing power from getting to the recepticle. If this is the case you will need an electrician to locate the loose wire.
What is an on and off switch used for?
It is used to switch equipment on and also it can be used to switch it off at a later time.
What circuit do you need for two switches one bulb?
wiring diagram of one bulb in two switches.. example, if switch a- on then switch b- off the bulb is on, switch a- off then switch b- on the bulb is on, switch a- on then switch b- on the bulb is off, switch a- off then switch b- off the bulb is off..
Can you get electrocuted if the switch is off but the breaker is on?
Yes you can. The proper wiring of a switch is to bring the hot wire to the top of the switch terminal and connect the load to the bottom of the switch. When the breaker is turned off it disconnects the voltage from the top of the switch and the switch is then safe to work on. By not turning the breaker off, the voltage is present at the top of the switch which could subject you to a nasty shock if you come into contact with it.
Why should you switch off a load?
You should switch off loads to save electricity and money for the electric bills.
Electric wall socket stopped working why?
Try checking your breaker panel for a tripped breaker, sometimes they can trip and it appears to be on still, to be sure turn off all single breakers completely to the off position to reset and then back to the on position. or There could be a switch controlling that paticular recepticle also, so check all switches in the area to be sure that its not just turned off. Sometimes recepticles are wired as (half hots) which means that half of the recepticle is always hot and the other half is switched. Also they can switch the entire recepticle with a switch(both sockets or halves). finnally The connections in one of the boxes between the recepticle and the breaker could be loose preventing power from getting to the recepticle. If this is the case you will need an electrician to locate the loose wire.
How do you install an on off switch from an existing wire?
If you are asking how to add a switch to a lamp (or other load device) cord, simply cut the line side of the cord and connect to the switch terminals. ----mikey
Installing a drivers side mirror on a 2004 impala?
take the inner door panel off or loose so you can get to the 3 10 millimeter nuts that hold the mirror on and take the nuts off and if the mirror is elecrtric you will have to disconnect the wires to it and then your ready to pull the mirror off.
Which sentence is correct grammatically switch it off or switch off it?
"Switch it off" is what we say in America.
Wiring guitar pickups to input jack without volme or tone controls?
can be done, i suggest to add an on/off switch actually you can have both with or without volume and tone with the on/off switch.... just never forget to wire the groundings .
How can you tell if your oil pressure switch is bad?
Add a tee to the sender and put a guage in the tee . This will tell you the on and off points of the sender .
What is the motto of Student Switch Off?
Student Switch Off's motto is 'SWITCH OFF - SAVE ENERGY - WIN PRIZES'.
Where is the on off switch on a furby?
Original Furbies do not have an On/Off switch. Emototronic Furbies have an On/Off switch on the bottom in between their feet.
Which sentence is right switch off the light or switch off light?
(this should be a grammar question) Switch off the light(s).
Does a 94 Honda civic have a on-off switch for the airbags?
No, there is no on/off switch.
What is an on and off switch used for?
It is used to switch equipment on and also it can be used to switch it off at a later time.
When was Student Switch Off created?
Student Switch Off was created in 2006.
