Just unscrew the cap and pour it in, it is on the drivers side engine compartment, high up on the firewall.
The same time as the brake fluid.
The fluid for the clutch comes from the brake fluid. After the brake master cylinder, there is a clutch master cylinder which takes fluid from the brakes. Fill up the Brake master cylinder.
According to the Owner Guide , the clutch master cylinder and the brake master cylinder are part of the same system . The clutch and the brake system can be filled at the brake master cylinder with DOT 3 brake fluid
The clutch master cylinder and the brake master cylinder are part of the same system . Both can be filled at the brake master cylinder using brake fluid
The clutch gets its fluid from the master brake cylinder reservoir. The master clutch cylinder sits just below the master brake cylinder reservoir and is fed fluid by gravity.
The clutch master cylinder is high up on the drivers side firewall, next to and slightly farther outward than the brake cylinder, it is the smaller of the two.
There is no fluid in the clutch....The clutch master cylinder takes DOT 3 brake fluid. It is the same fluid that you put into the brake master cylinder
shared with brake master cylinder.
drivers side firewall high up and behind the brake master cylinder, it is a small white reservoir with a black cap.
The clutch master cylinder is under the hood, drivers side, on the firewall. It is between the brake master cylinder and the drivers side fender. The cylinder is very small in comparison to the brake master cylinder. It goes through the firewall and connects to the clutch linkage under the dash.
In the clutch master cylinder next to the brake master.
Clutch master cylinder, usually located near the brake master cylinder. ------------------------------------------------------------------------------------------------ I chose the ( 1996 and 2003 ) Ford Escort owners manuals to look at and they show that the brake master cylinder is also used for the hydraulic clutch