Want this question answered?
If you mean 3.8 Litre engine, the answer is 200 horsepower, from the factory. 225 lb/ft of torque.
It shouldn't idle that high the factory idle setting is around 900 RPM's check to make sure nothing is sticking and check vacuum lines. Good luck fixing your problem.
Connect a diagnostic code reader to find out what's going on. That's the only way you'll know for certain. It could be something as simple as a bad air filter or oxygen sensor but the computer diagnostics will tell you what code has been stored.
on the crank behind the front cover
it's located on the firewall right in back of the intake
Not very easily if at all, and why would you want to?
A haynes manual...
3.8 litres is fractionally more than 1 US gallon.
They always blow the head gaskets between 70 and 100 thousand miles.
You can safely put 2ml into the 10l aquarium
there should be a sticker under the hood of the car that tells you what the gapping should be. .60
Fuel injected. fuel injected. the 3.8 liter was never carb. it was in the 80's in other GM vehicles