fi you look on the left hand side of your bike, you should be able to see your block and everything through your fairings. if you look right under your carbs there should be a set screw for your idle. if it is not right there look around and you will find it in just about the area. it is going to look like a rod with a groved sprocket kinda looking thing. hope this helps.
To adjust idle on a 1996 Yamaha Virago 110o, locate the throttle body and remove the rubber casing for the idle switch. Disconnect the idle air adjustment valve and turn the idle screw.
Right underneath the gas tank lies the Carburetor, there you'll find the idle screw. It's a big fat screw with a spring.
1,300 +/- 100 RPM. I got this info from my Clymer book.
[object Object]
It just pops a cracks
try to adjust the distributor.
You can adjust the idle on your Polaris 90 by turning the adjustment screw on the side of the fuel pump. Turn the adjustment screw to the left to increase the idle speed.
hi I have. A 1988 samurai and when I start it up it will not idle up at all I have to give it gas to idle up wondering if there's something I can do.
If you need to ask this question your better off having a professional work on it for you.
where can you find the idle of suzuki verona?
Your idle should be set to between 1000 and 1050 RPM to prevent low oil pressure at idle.
Idle speed is computer controlled and is not adjustable.Idle speed is computer controlled and is not adjustable.
It is not adjustable, it's controlled by the engine computor.BEST NOT FULL WITH IT ARE YOU WILL CREATE A MESS TRUST ME.
You adjust idle with idle timing