press F8 for full extension of flaps press F7 for a bit of extension of flaps(can press many times) press F6 for a bit of retracsion of flaps(can press many times) press F5 for full retracsion of flaps
engage flaps, lower landing gear, cut throttle and gently touch down.
Yes -by pressing f7
That is not common. Flaps are generally used to take-off and land.
To reduce the drag
Reduce flaps with left bracket '[' or 'F' key Increase flaps with right bracket ']' or shift-F key For full list of controls see help in related link below.
Start engines (ctrl and e)Set flaps 10%. Set thrust using keys f3. Bring engines to 45%, release brake (/) and start rolling , continue thrust to 100%. N2'(rotate) at 140 meaning pull back on the stick when in positive climb raise gear (G) retract flaps to normal. All key commands are available in the kneeboard (shift - f10)
To start launch with the aircraft you want on the active runway. Select the flaps and extend these 2 places Increase thrust using F3 to 90% Roll to about 130 knots and pull back on the joystick when cleared of the runway use "G" to raise the landing gear climb to about 4000 feet and level off use F2 to decrease the thrust slowly to about 75% Bring up the flaps to Zero.
Comma (,) for the left brake, and period for the right brake (.)
The aircraft would nose-dive ! The flaps are used during flight to help the plane gain or lose height in conjunction with the engines.
flaps it's wings really quiqly.
As long as your computer loads in the drivers the basic joystick will function. To use the on joy buttons/ throttle wheel you can access settings, controls and then select the joystick. From here you can set joystick buttons for main functions like lights, gear, flaps, throttle and brakes
It allows it to take off and land