How do you adjust the headlights on a Dodge Stratus?

Answer 1

Headlight adjustment on a Dodge stratus isn't too bad. Once you have the hood up the top of both headlights should be visible. you will need a wrench or something similar to loosen bolts. once bolts are removed you should be able to tilt the hadlights to your preferance. I owned a 1998 se version and my headlights had a small level on the top of each. I had some serious headlight issues. I have found that the best way to make your adjustments is by parking in front of a closed garage door or wall where your lights can shine on a surface so you can judge how much to adjust them. If you get them too low, you may as well not have headlights at all. It also helps the visibility issues to get brighter bulbs. Good Luck!

Answer 2

To adjust the headlights on a Dodge Stratus, locate the headlight adjustment screws on the back of the headlight assembly. There are usually two screws per headlight, one for vertical and another for horizontal adjustment. Park the car on a level surface facing a wall about 25 feet away. Turn on the headlights and mark the center of each beam on the wall. Use a screwdriver or a wrench to turn the adjustment screws, aligning the beams with the marks. The horizontal screw adjusts side-to-side alignment, while the vertical screw controls up-and-down positioning. Aim for a level, even beam pattern to ensure proper visibility without blinding oncoming drivers. Regularly check and adjust headlights to maintain optimal visibility and safety.

Answer 3

The ADJ. SCREWS BUT WHERE are they.