== # Loosen the idler pulley lock nut # Turn the adjusting screw to lower the idler pulley # Remove A/C belt. == # Install A/C belt over pulleys. # Apply a snug torque to the idler pulley lock nut. # Turn adjusting screw until proper belt tension is obtained. # Tighten idler pulley lock nut to 54 N·m (40 ft. lbs) == The Poly-V generator/Power Steering pump belt is provided with a dynamic tensioner. == WARNING: DO NOT ALLOW DRIVE BELT TENSIONER TO SNAP BACK, AS DAMAGE TO TENSIONER AND/OR PERSONAL INJURY COULD RESULT. # Remove air conditioning belt. Refer to procedure in this section. # Apply a force in a clockwise direction to the tensioner pulley bolt # Remove belt. == # Install belt over all pulleys, except for the tensioner pulley. Refer to for belt routing. # Apply a force in a clockwise direction to the tensioner pulley bolt # While holding tensioner, position belt over tensioner pulley. # Slowly release force on tensioner. # Verify belt is properly routed and engaged on all pulleys.
The Plymouth Grand Voyager.
Most likely the new pulley is not in line with the rest.
lacing windshield fluid reseroir on 198 plymouth grand voyager
There is no adjustment. If it does not provide the correct tension it needs to be replaced. It is cheap and easy to do yourself from underneath.
The 1987 Plymouth Voyager weighs in at about 3,305 pounds. The 1987 Plymouth Grand Voyager weighs right around 3,531 pounds.
It doesn't, a 1996 Plymouth Voyager does not have a cabin filter.
The 1987 Plymouth Voyager weighs in at about 3,305 pounds. The 1987 Plymouth Grand Voyager weighs right around 3,531 pounds.
yes of course you can people
what do I need to change the 1997 Plymouth voyager transmission oil
No.
were is the cooling temperature sensor located on my 96 Plymouth grand voyager
The Gran Voyager has more bells and whistles added to the vehicle as to a Voyager and with the year difference, advanced technology.