Want this question answered?
4D33 KC tapet clearance,volve
With No1 cylinder at TDC adjust the following valve clearances, No. 1, inlet and exhaust No. 2, inlet No. 3, exhaust No. 4, inlet No. 5, exhaust Then turn the crankshaft 1 full turn so that No 6 cylinder is at TDC and adjust the following valve clearances, No2. , exhaust No. 3, inlet No. 4, exhaust No. 5, inlet No. 6 inlet and exhaust. Both inlet and exhaust clearances ar 0.4 mm with engine cold. This info is from the original service manual
4.2 What? Without knowing what the engine is in we can not answer.
Both Exhaust & Inlet Clearances are 0.30mm = 0.012"...or..12 thou HOT
If it is the 8 valve engine then ensure you adjust them when the engine is cold. inlet- 0.10mm-0.15mm, exhaust 0.25mm - 0.30mm. if it is the 16 valve engine then the valves are hydraulic. DONT KNOW WHO HAS TOLD YOU THAT ABOUT THE 16V BUT THEY ARE NOT HYDRAULIC THEY ARE ADJUSTABLE
contact the datsunboys.com
Engine HOT.. intake 0.20 mm and exhaust 0.20 mm.
Valve clearances 4bd1
Indicate inlet and exhaust valve clearances of Toyota 5k engine
Valve clearances for the 84 Kadet 1.2 are Inlet 0.15 mm Exhaust 0.25mm Adjust with the engine hot.
What is the valve adjustment mistubishi 4d36
from memory its 14thou intake and exhaust