There is no adjustment.
how adjust the valves
find zerro lash than tighten one quarter turn each three quarter turns
hi there all 305's have hydralic valves but they still can be adjusted to remove valve noise and lash hope the clears up your question nate
Assuming the lifters are hydraulic, adjust each valve when FULLY closed to zero lash then turn in one additional turn, done.
no adjustment. you have the dohc engine and zero lash.
There is no adjustment.
They are not adjustable, the lifters self adjust to control valve lash.They are not adjustable, the lifters self adjust to control valve lash.
Zero lash then one turn in. (assuming this is a stock Chevy 350)
you don't the lash on a 90 model is not adjustable. the valves are hydrolic,unless they have been replaced with manual ones.
No valve lash adjustment,Unless you put in solid lifters.Otherwise tighten down to 25-35 lbs on the rocker arm nuts,they will self adj.
how to adjust vavles on 2.2 1998 s10
zero lash is on all it does not matter which they are all zero lash 305 is known for flat cam in those years