To adjust the throttle position sensor (TPS) on a 2004 Kia Sorento, first ensure the vehicle is turned off. Disconnect the TPS connector, then use a multimeter to measure the voltage output of the sensor while slowly opening the throttle. The voltage should increase smoothly without any abrupt jumps. If necessary, loosen the mounting screws of the TPS and carefully reposition it to achieve the correct voltage reading, then retighten the screws and reconnect the connector. Always reset the vehicle's ECU after making adjustments.
The throttle position sensor ( TPS ) is NOT ADJUSTABLE
The sensor is not adjustable.
It is not adjustable.
how to adjust the trottle position on a 1999 kia sportage
The throttle position sensor is not adjustable.
You cant
There is no adjustment, they are electronic. You just replace them.It senses the position of the throttle and sends the information to the computer.
your tps or throttle position sensor
The throttle position sensor is not adjustable.
To adjust the throttle position sensor (TPS) on a Mazda RX-7, first ensure the ignition is off. Disconnect the TPS connector and remove the sensor from the throttle body. Using a multimeter, check the resistance across the sensor terminals and adjust the sensor's position until you achieve the specified voltage or resistance values as per the service manual. Once adjusted, reassemble the sensor, reconnect the electrical connector, and verify the throttle response.
i dont know i have no friend to help me out
the TPS (throttle position sensor) controls the idle.