under hood by were the battery is ussaully located you will find to connect point they should be clearly marked with negative and positive on them looks like bolts sticking out of fender well with nuts on them
Under the hood on the driver side are positive and negative jump start posts. The cables attach there.
Disconnect the battery, remove the spark plug cables and boot, and remove the old spark plugs. Put in the new spark plugs, attach the cables and boots, and connect the battery.
On the throttle body, opposite of where the cables attach.
It is on the throttle body, opposite of where the cables attach.
The battery, on a 2010 Chrysler Limited Sebring, can be changed by first removing the battery cover. Remove the battery cables and the retaining bolt. The battery will left out. Reverse the process to install the new battery.
The tps is on the throttle body opposite of where the cables attach.The tps is on the throttle body opposite of where the cables attach.
It is the three wire sensor on the throttle body, opposite of where the cables attach.
Remove the positive battery cable from your 2001 Chrysler Sebring battery. Remove the cables from the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
Yes
You hook the charger cables to the red and black jump start posts under the hood.
Yes, attach the cables to the red and black jump start posts under the hood.
Disconnect the car's battery cables, remove the spark plug cables and boot covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the boot covers and cables and reconnect the battery cables.